How to change Lift-Off Distance (LOD)

News
Sep, 24 ,2020
773
1
There are three Lift-Off Distance (LOD) settings - Low (Default), Medium and High. Based on the data from our sensor tests with a variety of mousepads, we chose low as the default setting which will be between 1.0~1.2mm. This range, in our opinion, is the optimal LOD. However we understand that people have different usage habits which is why we have three adjustable settings to suit different needs.

If you don’t encounter any issues while using the mouse, there is no need to change the LOD.

However if you encounter any of the situations below, we suggest you adjust the LOD to the Medium or High setting.
  • Can't get used to the feeling of the default LOD.
  • The cursor drags when you lift the mouse.
  • Feel the LOD is too slow after switching to 0.6mm mouse feet.
Instructions on how to change the Lift-Off Distance:
Low (Default)
  • Plug out the USB connector
  • Hold down the buttons of Mouse 1 + Mouse 4
  • Continue to hold the buttons down and plug in the USB connector
  • On the bottom of the mouse, one of the indicator lights for Polling Rate will blink twice
  • The mouse is now set to the Low LOD setting.

Medium
  • Plug out the USB connector
  • Hold down the buttons of Mouse 1 + Mouse 5
  • Continue to hold the buttons down and plug in the USB connector
  • On the bottom of the mouse, two of the indicator lights for Polling Rate will blink twice
  • The mouse is now set to the Medium LOD setting.

High
  • Plug out the USB connector
  • Hold down the buttons of Mouse 1 + Mouse2 + Mouse 4
  • Continue to hold the buttons down and plug in the USB connector
  • On the bottom of the mouse, all three of the indicator lights for Polling Rate will blink twice
  • The mouse is now set to the High LOD setting.

Member Forum

Leave Message
jopo_m**
2020-10-04 15:00
#1
"we chose low as the default setting which will be between 1.0~1.2mm. "
Is it possible to tell the LOD of the medium setting ~ ?
NameContentReplyTime
Member Nickname
Member Nickname
Edit Nickname

Extended reading

See more

ZYGEN NP-01 Coating Change (Matte)

May, 14 ,2021
After we launched the OUTSET AX and ZYGEN NP-01S, we received a lot of feedback asking us to provide the same coating on the NP-01...
See more

ZYGEN NP-01S Mouse Comparison List

Apr, 15 ,2021
In order to give everyone a better understanding of the ZYGEN NP-01S’s shape, we’ve put together a number of images comparing the NP-01 to more commonly used mice...
See more

VAXEE announces it’s second collaboration with ZYGEN, the NP-01S

Apr, 15 ,2021
The ZYGEN NP-01 has an asymmetrical shape that does not limit a user's wrist angle. The NP-01S follows this design concept and has the same curve on the right side, however it has a lower back which allows for more space between the palm and the mouse. Th
TOP
Change Nickname

Nickname